Submarine mechatronic accessories for swimming pools
Professional boat cleaning accessories
Accessories made for use with our next-generation underwater drones for maintenance of yacht hulls and pleasure craft.
Accessories made for use with our next-generation underwater drones for maintenance of yacht hulls and pleasure craft.
Set of Keelcrab IP 67 drone cases, perfect for moving between docks and keeping your Keelcrab safe and secure; the control unit and remote control are sheltered in a dedicated, dry inner case; also great for sheltering in the lockers of your boat.
€ 396,00
Perfect for moving between docks but also for keeping Keelcrab and electronics safe and secure.
€ 79,00
Keelcrab BAG is a filter holder structure that can be easily applied inside your Keelcrab. It is essential to avoid the phenomenon of vegetation reattachment especially in very still or stagnant water or where the boat cannot return to navigation quickly (typically cleaning operations during the winter season).
€ 179,00
Replacement filter made of 180-micron nylon thread (optional 50 micron or custom micrometer), flushable and with virtually unlimited service life.
€ 32,00
A.N.C.C.P. certified white nylon brush. Perfect for frequent first cycles of hull maintenance. Compatible with hard matrix (non-water soluble) antifouling paints that meet the requirements of Regulation (EU)528/2012 BPR or silicone matrices (or silicone films) or new biocide-free matrices. Included for THE KEELCRAB and KeelCrab PRO.
€ 179,00
A.N.C.C.P. certified yellow nylon brush, perfect for maintenance cycles at medium intervals. Compatible with hard matrix (non-water soluble) antifouling paints that meet the requirements of Regulation (EU)528/2012 BPR or silicone matrices (or silicone films) or new biocide-free matrices. Included for KeelCrab PRO.
Certified stainless steel medium brush A.N.C.C.P, perfect for maintenance cycles at extended intervals. Compatible with hard matrix antifouling paints that meet the requirements of Regulation (EU)528/2012 BPR or silicone matrices (or silicone films) or new biocide-free matrices. Included for KeelCrab PRO.
Counter-rotating cushioned disc brush kit (15mm excursion/adaptation to surface) driven by dedicated waterproof motor with variable bristles (two nylon discs as standard and optional stainless steel discs ordered separately) to increase the cleaning capabilities of your robot.
€ 799,00
A.N.C.C.P. certified fixed longitudinal brush with 0.50 nylon bristles. This entry-level brush model (standard on keelcrab-ONE) allows keelcrab a “floor broom” effect brushing, guaranteeing the removal by drag of algae or surface vegetation then sucked up by the suction effect generated by the drone suction pump. Length and flexibility have been studied and tested to guarantee the settlement of the bristles during piloting manoeuvres, even in corners of the hull where algae and vegetation creep in and proliferate. This accessory is suggested for those who require constant and continuous (weekly) cleaning in total respect of surfaces and water-soluble paints (self-polishing) required and recommended in the sailing-race sector.
€ 129,00
This accessory enables wi-fi transmission to device (smartphone-tablet) of the video stream captured by the drone.
Through this optional you will be able to connect to the wi-fi generated by the drone and through the use of appropriate APP (free) be able to view (record or take pictures) directly on your device.
Download WIFI VIEW from Google Play store and Apple Store
€ 274,00
Pair of LEDs 400 Lumen – 6.000 Kelvin IP69K with watertight 2-pin connector and fixing rings. With this light-pack you will be able to use your keelcrab at any time, even for night-time inspections. They are extremely useful even in murky water and allow perfect illumination of technical elements in the hull and the entire surroundings thanks to their inclination.
€ 249,00
10-meter extension cord on the drone power cable to bring the total length of your keelcrab’s cable to 30 meters. The extension cord comes with IP69 watertight connectors.
€ 186,00
10-meter extension cord to bring your keelcrab’s power cord to 30 meters total length. The extension cord comes with IP69 watertight connectors.
€ 142,00
Kit for using your keelcrab in “manual control” mode while diving (apnea or ARA/ARO). The kit consists of 2 side handles and an IP69 switch switch for operating the traction motors (to be able to operate or stop the robot’s advancement and the associated dragging effect of the diver in the hull).
€ 199,00
Replacement kits of mechanical components of the drone possibly subjected to increased wear and tear.
Full protection from dust and also in water up to a depth of one meter (conditions specified by the supplier).
Keelcrab-BAG allows the recovery of dirt removed from the brushes avoiding environmental dispersion and the concentration of debris within the harbor (or on the hulls of boat neighbors) also proving to be an eco-friendly accessory while also counteracting the phenomenon of alien species migration at the root.
Optional 50 microns or customizable micrometry.
Its bristles extend the useful life of your antifouling over time by removing only algae or overlying vegetation.
Its bristles extend the useful life of your antifouling over time and remove algae or vegetation and small coral principles.
Its bristles extend the life of your antifouling over time and remove algae, vegetation and fouling principles. This method is not intended to work on the removal of so-called “dog teeth,” because the goal always remains its prevention.
All references on the installation procedure can be found in our Handbook. If you need more information, you can contact customer support by w.up at +393270295197 or by sending an email to ufficiotecnico@keelcrab.com.
You can order up to 30 meters of extension cord (50 meters total) maintaining the standard electronics box. For higher extension needs, the maximum system length that includes an upgraded version of the electronics box (dual-powered in case of extension cord and without extension cord with 2 separate connectors) is 60 meters, for a total of 80 meters total drone cable (in this case of you can contact customer support for more information by w.up at +393270295197 or by sending an email to ufficiotecnico@keelcrab.com).
17 meters. If more length is needed, a customized solution will have to be designed.
The Divers kit is a kit consisting of 2 ergonomic handles that enable an aquascooter drag effect while saving time and effort, and an IP69 underwater power switch of the drone’s forward motors and brush body. In this way, during cleaning operations, you can stop the engines on a specific spot on the hull, devote yourself to all the typical tasks of inspection, cleaning, reporting, or whatever, turn it back on, and continue.
Yes it is! The kit is designed to be fully installable and adaptable to previous versions of keelcrab with the purpose of significantly increasing the cleaning capabilities of your drone.
Registered office: via Rezzonico 39, 22100, Como (Italy) | Headquarter: via Pietro Ferloni n.28 Bulgarograsso 22070, Como (Italy) | Vat number: 03385790138
REA CO-311796
Cap. Soc. € 23.550,00